Freeing the Rig: WD-40 Eases My Double-Nut Bolt

My rigging device relies on a bolt secured with two nuts to ensure a strong and stable connection. However, over time, the threads on the bolt had started to bind, making it increasingly difficult to tighten or loosen the nuts. Adjusting the rigging became a slow and frustrating process, and I was worried about damaging the threads if I forced them too much.

Knowing WD-40's ability to penetrate and lubricate threaded fasteners, I decided to give it a try. I directed the spray nozzle along the entire length of the bolt's threads, making sure to saturate the area where the nuts were binding.

After letting it sit for just a moment, I tried turning the nuts. The difference was immediate and significant. They now moved much more freely along the threads, making adjustments quick and easy. The binding was gone, and I could tighten and loosen the nuts smoothly without any risk of damage. That simple application of WD-40 had made a critical part of my rigging device much more user-friendly and reliable.

Step-by-Step Guide: Freeing a Bolt with Two Nuts Using WD-40

Here's how I used WD-40 to make the nuts on my rigging device bolt move freely:

Step 1: Identify the Binding Nuts and Bolt Threads

Locate the bolt with the two nuts that are difficult to turn. Observe the threads for any signs of rust or grime.

Step 2: Gather Your WD-40

Ensure you have your can of WD-40 Multi-Use Product ready.

Step 3: Apply WD-40 to the Bolt Threads

Aim the WD-40 nozzle along the entire length of the bolt's threads, focusing on the areas where the nuts are binding. Apply a generous and even coat.

Step 4: Allow Penetration (Short Wait)

Let the WD-40 sit on the threads for a short time, about a minute or two, to allow it to penetrate and loosen any binding agents.

Step 5: Attempt to Turn the Nuts

Carefully try turning both nuts along the bolt's threads. You should notice they move much more easily now.

Step 6: Work the Nuts Back and Forth

Turn the nuts up and down the threads several times to help distribute the WD-40 and ensure smooth movement.

Step 7: Repeat Application (If Necessary)

If the nuts are still stiff in certain areas, apply another small amount of WD-40 to those spots and continue working the nuts.

Step 8: Wipe Away Excess (Optional)

Once the nuts move freely, you can wipe away any excess WD-40 with a clean cloth.

Now adjusting your rigging device should be much easier and more efficient!